Level Switch Sweden
Level Switch NV10P-KM
Level Switch NV10P-KM
Couldn't load pickup availability
In stock in Stockholm · despatch in 1–2 working days · 24-month warranty
Prices exclude VAT. Companies registered in Sweden can pay by invoice at checkout, 30 days — see how it works. EU companies outside Sweden: enter your VAT number at checkout and VAT is removed automatically under the reverse-charge rules. A VAT invoice is issued with your order. Outside the EU: email us and we will quote and invoice you directly.
Not sure this is the right switch? Call +46 8 32 33 00 or email info@levelswitchsweden.com before you order — we answer in English and Swedish.
The Elniva NV10P-KM is the NV10P overflow protection switch fitted with a compensation diaphragm, allowing it to be mounted inside the conveyor or vessel. Rated IP65. Fully mechanical — no electronics, no calibration, and unaffected by dust or build-up.
Use the NV10P-KM for
- Overflow protection in screw conveyors, belt conveyors and elevators
- Damp or heavily dusty environments requiring IP65
- Positions where the switch must sit inside the equipment and a conventional air inlet would not work
Typical materials: grain, animal feed, wood pellets, chips, granulates, plastic pellets and powders.
Important: the NV10 series is intended for conveyors as overflow protection. For level monitoring in silos and hoppers, choose the NV14P or NV14P-KM.
How it works
The switch operates as a diaphragm-actuated contact. A microswitch is controlled by a rubber diaphragm clamped between a retaining ring and a pressure plate. The small-diameter diaphragm requires a distinct force to actuate the microswitch, so it triggers only when material builds up against it.
Overload protection: diaphragm travel is limited to approximately 3–4 mm.
Note: positive pressure cannot be compensated. Diaphragm switches must not be used in pressure vessels.
Specification
| Part number | 181-0505 |
| Housing | Oven-lacquered die-cast light alloy |
| Screws and fasteners | Nickel-plated brass |
| Diaphragm | Oil-resistant nitrile rubber, with compensation diaphragm |
| Operating temperature | +1 °C to +60 °C |
| Microswitch | 125 VAC / 15 A · 24 VDC / 0.5 A |
| Cable entry | 18.6 mm threaded connection, PG11 cable gland |
| Enclosure rating | IP65 |
| Diaphragm travel | Approximately 3–4 mm |
| Weight incl. packaging | 0.8 kg |
Delivery, warranty and support
Stock held in Årsta, Stockholm. Despatch normally within 1–2 working days. 24-month warranty. Technical support in English and Swedish via info@levelswitchsweden.com. Collection at Byängsgränd 14 in Årsta is welcome.
Several units, or a quotation?
Volume discounts apply from 5 units. Distributors, installers and machine builders have separate terms. Companies can order against invoice — contact info@levelswitchsweden.com.
Share
